Окно 32×48

32×48 Window: Dimensions, Types & Ordering Guide

A 32×48 window measures 32 inches wide by 48 inches tall — one of the most commonly stocked residential window dimensions in North America, suited to bedroom, bathroom, kitchen, and light commercial applications. The recommended rough opening for a 32×48 window is 32½ inches wide by 48½ inches tall, allowing ¼-inch clearance on each side for shimming, leveling, and sill flashing during installation.

Hotian manufactures 32×48 windows to order in vinyl/uPVC and thermal-break aluminum frame systems. Unlike catalogue suppliers with fixed production runs, every Hotian 32×48 window is built to your specified configuration — window type, frame material, glass package, hardware finish, and color — at the time of order. Single-unit replacement orders and bulk project orders are both supported from the same production line.

32×48 Window Types Available

Single Hung 32×48 Window

The single hung configuration is the most common 32×48 window type for residential replacement and new construction. The lower sash slides vertically for ventilation while the upper sash remains fixed. Hotian’s 32×48 single hung windows are available with tilt-in sash for interior cleaning access, dual weatherstripping, and standard or Low-E insulated glass units in vinyl or aluminum frames.

Sliding 32×48 Window

The sliding configuration opens horizontally and is suited to bedroom, bathroom, and kitchen applications where exterior clearance for a projecting sash is limited. Available in two-lite and single-slider configurations in vinyl and aluminum with Low-E or standard double glazing.

Casement 32×48 Window

The casement configuration opens outward on a side hinge for maximum ventilation and a clean sightline. 32×48 casement windows are available in single-lite and twin configurations in thermal-break aluminum and vinyl frames, with multi-point locking hardware and Low-E or acoustic glazing options.

Picture / Fixed 32×48 Window

The fixed picture window in 32×48 provides a large unobstructed glass area for natural light and views without ventilation. Suited to living areas, stairwells, and feature walls as a standalone unit or in combination with operable windows on either side.

Варианты материалов рамы

Vinyl / uPVC 32×48 Window

Vinyl and uPVC frames deliver strong energy efficiency, low maintenance, and cost-effective performance for residential replacement and new construction projects. Multi-chamber profiles, integrated weatherstripping, and insulated glass units keep heating and cooling loads down while maintaining interior comfort. Available in white, tan, and custom color finishes.

Aluminum 32×48 Window

Thermal-break aluminum frames provide slim profiles, structural strength, and long-term durability for residential and light commercial applications. Powder-coated in a wide range of standard and custom colors. Available with single, double, or triple insulated glass units and optional impact-rated glazing for coastal and high-wind locations.

Glass Options for 32×48 Windows

32×48 Window Rough Opening & Installation Notes

The actual window unit for a 32×48 nominal size is typically manufactured at 31¾ × 47¾ inches or 31½ × 47½ inches, depending on the frame system — approximately ¼ to ½ inch smaller than the rough opening on each dimension to allow for shimming and proper installation. Always confirm the exact window unit size and recommended rough opening with Hotian at order stage for your chosen frame system and window type.

For replacement projects, measure the existing rough opening at three points across both width and height and use the smallest measurement to determine the correct window size. For new construction, frame the rough opening at 32½ × 48½ inches for a standard 32×48 window unit.

Приложения

Bedroom and bathroom replacement windows in residential renovation projects

New construction single-family homes and townhouses

Multi-family apartment and condominium buildings

Light commercial interiors — offices, retail, hospitality

Accessory dwelling units (ADUs) and modular construction

Ordering a 32×48 Window from Hotian

Submit your window type (single hung, sliding, casement, or fixed), frame material (vinyl or aluminum), glass package, hardware finish, and quantity to receive a factory-direct quote. For bulk orders covering multiple window types and sizes within a single project, a full window schedule can be submitted for coordinated production pricing and lead time confirmation. Standard lead time is 20–25 working days from order confirmation and deposit receipt.

Техническая спецификация