Portes-fenêtres en acier ou en bois : comment les remplacer et choisir le bon matériau

Table des matières

Are you considering new French doors and wondering whether to go with the classic look of bois or the robust strength of acier? Perhaps you want to swap your existing steel French doors for wood ones (or the other way around!).

This guide will walk you through everything you need to know about replacing French doors, helping you choose the right material and understand the installation process. It’s important to consider more than just the aesthetic appeal when making this decision.

Understanding French Doors

Before we dive into replacements, let’s understand the basics. Portes françaises are a pair of doors that open from the center, creating a wide and open entryway. You’ll typically find them made from these two popular materials:

  • Wood French Doors: These doors are known for their timeless appeal and design versatility. They’re a favorite for their warm aesthetic, and they can be used both inside and outside.
  • Steel French Doors: Steel doors are known for their security and resilience, making them great options for exterior doors. Many also have an insulated core to add energy efficiency.

Can You Swap Steel for Wood, and Vice Versa?

The good news is: Yes, you can replace steel doors with wood doors, and vice versa. However, it’s crucial to have a clear plan. This process is not just a simple swap, but rather one that has details that influence your project’s ease and success.

Replacing Wood French Doors with Steel Doors

If you’re planning on going from wood to steel, consider the following:

  • Frame Compatibility: Many existing bois door frames can accommodate acier doors. This is because many manufacturers use a similar acier frame design.
  • Hinge Alignment: The hinges on the new acier door must match your existing frame. Custom hinge options may be available from certain manufacturers.
  • Strike Plate Compatibility: Make sure the lock strike plate on the acier door lines up with your existing door frame. Proper alignment is critical for secure closing.
  • Pre-Hung vs. Door Slab: Understanding the difference between these two options is important when preparing your project.
    • Pre-hung doors come with a new métal frame, often providing the most secure option, though with a more involved installation process.
    • UN dalle de porte includes only the door itself, without the frame. If you are using a door slab, you should ensure its dimensions, hinge placement, and lock bore all match the original door.
  • Sécurité: UN acier door in an older bois frame can still be a security risk. Maximize security by using 3-inch screws to secure the deadbolt strike plate into your wall studs.
  • Standard Sizes: It’s important to keep in mind that acier doors are often made according to standard sizes. Check out our guide on standard french door sizes to learn more.

Replacing Steel French Doors with Wood Doors

If you are looking to change your doors from steel to wood, you may want to think about these key points:

  • Attrait esthétique : Bois doors offer a warm, inviting, and versatile style.
  • Customization Options: Avec bois, you have endless design possibilities, allowing for detailed shaping and personal touches.
  • Sound Reduction: Bois naturally helps to reduce noise.
  • Coût: Know that bois doors will typically cost more than acier options, plus the cost of installation.
  • Maintenance Requirements: Bois requires regular upkeep like painting or sealing. This is necessary to protect the door from warping, rot, and damage from the elements.
  • Wood Choice: Be sure to choose a bois that fits the style of your home and is suitable for exterior use.
  • Door Slab vs. Pre-Hung: As with acier doors, you can choose a dalle de porte or a pre-hung door unit. Choosing a pre-hung door unit will make the installation process easier.
    • Door Slab Note: Again, be sure to match the new dalle de porte to the original’s size, style, hinge placement, and lock bore.
  • Be sure to familiarize yourself with the parts of a door before beginning your project.

Step-by-Step: Replacing Your Doors

No matter what material you choose, these steps will generally apply for replacing your door:

  1. Remove the Old Door:
    • Remove any trim you want to reuse.
    • Pry the trim away gently using a pry bar.
    • Cut through the nails that attach the door to the frame, and remove the door.
  2. Accurately Measure:
    • Carefully note the width, height, and depth of the opening.
    • Double-check to avoid errors in your project.
  3. Install New Frame (If Applicable):
    • If using a pre-hung door, install the frame into the opening.
    • Use shims to make sure the frame is square and level.
    • Attach the new frame to the wall using screws.
  4. Hang the New Door:
    • Line up the new door in the frame opening.
    • Attach the hinges carefully.
    • Test the door to make sure it moves properly.
    • Verify that the gaps around the door are consistent.
  5. Installer le matériel :
    • Install the door knob, lock, and the strike plates.
    • Test to ensure the lock works properly.
  6. Reinstall Trim:
    • Re-attach any trim that you previously removed.
    • Ensure the trim fits securely against the frame.

Key Installation Factors:

  • Level and Square: This is very important for the door to operate properly.
  • Weatherstripping: Proper weatherstripping provides energy efficiency and reduces drafts.
  • Consistent Gaps: Try to achieve an even 1/8th inch gap around the door’s edges.
  • Hinge Alignment: Use a story rod or template for proper hinge alignment when using an old frame.
  • Pre-Drilling: Be sure to pre-drill holes when attaching screws to wood to prevent splitting.
  • Door Thickness: When using a wood slab with a steel frame, be certain the lock spindle is long enough.

Understanding Door Frames

At times the door frame also requires replacement. Here is what you should know:

  • Pre-Hung Doors: This will simplify the process, as it includes a new frame.
  • Frame Replacement: A more involved process that requires precise measurements and shimming.
  • Welded Steel Frames: These are generally in new construction, and hard to install in existing homes.
  • Knock-Down Frames: These frames are made of three pieces and can be easily installed in wood-stud walls.

Navigating Special Circumstances:

  • Rotten Wood: It is best to replace both the door and the frame if there is wood rot.
  • Uneven Floors: This will require you to float the frame above the floor, using a laser level to guide you.
  • Older Doors: Older doors may require extra adjustments, and it may be necessary to add weatherstripping.
  • French Door Gaps: Be sure to leave an extra 1/8th of an inch between doors when installing french doors.

DIY vs. Professional Installation?

  • DIY: If you have the proper experience and skills, you can do it yourself.
  • Professional: It is advisable to hire a professional if you are not comfortable with these tasks or if the frame needs to be replaced.
  • Time: This project may take you a few hours or more, depending on if the frame needs to be replaced.
  • Skill: Replacing a door without replacing the frame requires some skill.
  • Weight: Doors are heavy, and you may need help lifting them.

Adding Wood to a Steel Door

If you enjoy the look of wood without swapping your acier doors, consider these:

  • Plywood: You can adhere thin plywood to a steel door. Be sure to finish the wood to protect it from the elements.
  • Exterior Adhesive: Use exterior-grade adhesive for best results.
  • Security Issues: Adding wood may compromise the door’s security and may shorten the reach of the lock spindle.
  • Appearance: The look of plywood might not be as natural as a real wood door.
  • Alternatives: Utiliser vinyl wraps ou bois veneers for a more natural finish.

Cost Estimates

  • Bois doors will usually cost more than acier.
  • Pre-hung doors are usually more expensive than door slabs.
  • Portes sur mesure will command a higher price due to the specific requirements.
  • Professional installation will add to the total cost.

Conclusion

Whether switching from acier à bois or the other way around, properly replacing your French doors is very possible. Ensure that you measure everything carefully, understand the steps, and make a decision about if you want to do it yourself or hire a professional.

You should consider the project requirements, cost and your own experience and skills before you begin. Remember that a porte pré-montée is generally easier to install. Also, if you are only replacing a dalle de porte, be sure it is the same size and style, and that all the hardware will fit properly.

Facebook
Gazouillement
LinkedIn

Derniers articles

17 types de portes en bois
17 types de portes en bois : une liste simple
porte-fenêtre en acier vs porte-fenêtre en bois
Portes-fenêtres en acier ou en bois : comment les remplacer et choisir le bon matériau
Quel est le prix d'une porte standard
Quel est le coût d'une porte standard ?
Combien de temps durera votre porte en bois
Combien de temps durera votre porte en bois ?
Double Doors vs. French Doors
Double Doors vs. French Doors: Key Differences

Fabricant leader de portes et fenêtres - Hotian

Hotian se spécialise dans la création, la fabrication et la fourniture de fenêtres et de portes sur mesure, offrant des solutions pour une variété de projets commerciaux et résidentiels. Contactez-nous dès maintenant et découvrez comment nous pouvons donner vie à vos idées de projet !

Besoin d'aide ? Discutez avec nous

Obtenez une consultation gratuite

Fichiers pris en charge : jpg, png, pdf, jepg. Taille maximale du fichier : 20 Mo

*Vous pouvez être assuré que vos informations sont en sécurité chez nous.